产品 |参数表 |技术 应用  | 联系我们 接口继电器 | 附件 |  PLC联机的适配器 | 主页 |

 

        

 

Interface unit for Profibus DP

FBPB16O16I

Description

FBPB16016I is a DIN-rail mount Profibus DP slave station used for controlling Delcon's interface relays from a Profibus network.

The unit is connected to the relay mounting bases using standard flat cable. The unit can switch up to 16 input and 16 output relays. Mounting bases are available either as 16 point or 8 point. The new 8 point bases have additional terminals for common and logic earth so that separate termination blocks are not needed for field connections. They can be daisy chained to give 16 points.

Data sheet in pdf format.

Physical Dimensions ( l x w x h from rail/mm) 96 x 94 x 60
Weight 220 g
Temperature Range 0 ...+55 (-25 ...+70 storage)
Power Supply 24 VDC
Supply current 70 mA (300 mA max.)
Profibus address range 1?9
GSD file DELC057E.gsd
Baudrate Up to 12 Mbit/s
Isolation between bus and power supply 1000 VDC
Connections 2 x 20 pole flat cable connector
I/O 16 outputs and 16 inputs
Compatible 16 point mounting bases: (output or input) MBS 16BD
MBS 16BDP
(with push buttons)
Compatible 8 point mounting bases for output: MB8BO
MB8BOP
(with push buttons)
MB8BOE (extension)
MB8BOPE (extension with push buttons)
Compatible 8 point mounting bases for input: MB8BI
MB8BIP
(with push buttons)
MB8BIE (extension)
MB8BIPE (extension with push buttons)
Compatible interface relays: All, except the special SLI ...CRR type.
Use 24 V output models (not 5 V).