|
MOUNTING BASES
16 Channel mounting bases MBS 16-series
MBS 16AD |
Mounting base NPN, without push buttons. |
MBS 16ADP |
Mounting base NPN, with push buttons. |
MBS 16BD |
Mounting base PNP, without push buttons. |
MBS 16BDP |
Mounting base PNP, with push buttons. |
The plug-in relays can be connected to programmable controllers in groups of 16 using a mounting base, flat cable and adapter specific to the controller. MBS bases are either MBS
16AD for NPN logic or MBS 16BD for PNP logic. By adding a
"P" after the product name the base will be supplied with a test button on each channel. These simulate the signal and are used for testing and commissioning. Type MBS
16AD can support a mix of input or output modules (only if the controller supports this). Type MBS
16BD is configurable with jumpers input or output in two groups of eight.
Dimensions with relays mounted are 230 mm by 90 mm by 85 mm (hight).
Voltage rating at field side is 250 V and maximum current is 6,3 A/point.
|