|
Sockets for single relays:
DIN-rail
sockets:
| MIS
1 |
DIN-rail socket for input relays |
|
MOS 1 |
DIN-rail socket for output relays |
|
These bases are for DIN-rail
installation of the plug-in relays. They have high quality spring connectors rated at
6,3 A and screw terminals. The field voltage is 250 VAC maximum (both sides
for MOS 1 type). The relays are held in place by a captive retaining screw
(UNC 4-40). MIS 1
is for input relays and MOS 1 is for output relays. Download specifications for DIN-rail
sockets in pdf format. Note that product SLO
24CRX is rated at greater than 6,3 A and so the presoldered "S"
version is recommended, for which this limitation does not apply.
MIS 1G and MOS 1G have
Phoenix terminals with two pins per connecting point and thus improved torque resistance.
Dimensions are: width 12,5 mm, depth 80 mm and hight with relay 85 mm.
Also there are available MIS 1T and MOS 1T with test contacts (Phoenix
connectors) and MIS 1CC and MOS
1CC with cage clamp connectors made by Wago. The MIS 1WW and MOS 1WW bases
differ
from main types so, that they have wire wrapping pins at logic side (for 5 V/24
V use).
|
DIN-rail socket MOS 1
|
| Sockets for
PCB mounting:
|
PCU 1 |
PCB socket for general use |
 |
| PCI
1 |
PCB socket for input relays |
| PCO 1 |
PCB socket for output relays |
These sockets
can be soldered to a printed circuit board. There is a
captive nut (UNC 4-40) for the retaining screw and high quality spring connectors rated at
6,3 A.
PCU 1 is suitable for either input or output Plug-in interface relays. PCI 1 is for input relays and PCO
1 is for output relays.
Specifications for PCB sockets in
pdf format.
|
Adapter for G4 mounting base: PCU G4
This adapter enables Delcon’s
interface relays to be mounted in
"G4"
type mounting bases as used by opto module manufacturers. The adapter has a captive screw
for secure mounting and can be used for both input and output relays.
Current rating is 6,3 A.
|
 |
|
|
|
