产品 |参数表 |技术 | 应用  | 联系我们 | 接口继电器 | 附件 | 和 PLC联机的适配器 | 主页 |

Logic converters:

FCA 16N/P

This 16 channel converter is used to change NPN signal to PNP signal in 24 VDC systems connected with 20 pole flat cables (FC20-XXX).
For example when there is PNP type logic card and adapter and NPN type mounting base MBS 16ADP.
For input signals with 3-wire DC proximity switches or electromechanical contacts, not for 2-wire proximity switches.

FCA 16N/P-2

Same as above converter but can be used with 2-wire sensors. Allows up to 1 mA off-state current, on-state load is 5 mA.



FCA 16P/N

 This 16 channel converter is used to change PNP signal to NPN signal in 24 VDC systems.
When there are NPN type input signals from switches or NPN type mounting base MBS 16ADP and PNP type logic card and adapter. Not for 2-wire DC proximity switches.